產品概述 Overview
組合式變壓器,是將升壓變壓器器身、開關設備、熔斷器、分接開關及相應輔助設備進行組合的變壓器,高壓開關、熔斷器均安裝在油箱內,整體外形尺寸較小,其結構形式與90 年代從美國引進的箱變相似,按產品結構及元件 配置可分為兩種,一種是全絕緣分箱式產品,一種是高壓采用干式套管出線的共箱式產品。
A combination transformer is a transformer that combines the body of a step-up transformer, switchgear, fuse, tap changer, and corresponding auxiliary equipment. The highvoltage switch and fuse are all installed in the oil tank, with a smaller overall size. Its structural form is similar to the box transformer introduced from the United States in the 1990s, and can be divided into two types according to product structure and component configuration. One is a fully insulated box type product, One type is a common box type product that uses dry casing for high-voltage output.
應用范圍 Application scope
應用在新能源領域包括光伏發電和風力發電等;
廣泛應用于工業園區、居民小區、商業中心及高層建筑等各種場所。
Applied in the field of new energy, including photovoltaic power generation and wind power generation;
Widely used in various places such as industrial parks, residential areas, commercial centers, and high-rise buildings
使用環境 Usage environment
海拔高度:≤ 5000 米;
環境溫度:溫度+40℃,低溫度-40℃ ;
濕度:日相對濕度平均值不超過95%,月相對濕度平均值不超過90%;
風速:戶外風速不超過45m/s;
防震:水平加速度不大于0.4m/s2,垂直加速度不大于0.15m/s2;
安裝地點傾斜度:不大于3°;
安裝環境:周圍空氣不受腐蝕性,可燃性氣體等明顯污染,安裝地點無劇烈振動;
污穢等級:Ⅳ級;
定購本產品超出上述條件的規定時,可與本公司協商。
Altitude: ≤ 5000 meters;
Environmental temperature: maximum temperature+40 ℃ , minimum temperature -40 ℃ ;
Humidity: The average daily relative humidity shall not exceed 95%, and the average monthly relative humidity shall not exceed 90%;
Wind speed: Outdoor wind speed not exceeding 45m/s ;
Shockproof: Horizontal acceleration not exceeding 0.4m/s 2, Vertical addition The speed shall not exceed 0.15m/s2;
Installation site inclination: not more than 3 ° ;
Installation environment: The surrounding air is not significantly polluted by corrosive or combustible gases, and there is no severe vibration at the installation site;
Pollution level: Level IV;
When ordering this product beyond the above conditions, you can negotiate with our company.
產品執行標準 Product Execution Standards
? GB1094.1-2013 電力變壓器第1 部分: 總則
? GB1094.2-2013 電力變壓器第2 部分:液浸式變壓器的溫升
? GB/T1094.3-2017 電力變壓器第3 部分:絕緣水平、絕緣試驗和外絕緣空氣間隙
?GB/T1094.4-2005 電力變壓器第4 部分:電力變壓器和電抗器的雷電沖擊和操作沖擊試驗導則
? GB1094.5-2008 電力變壓器第5 部分:承受短路能力
? GB/T1094.7-2008 電力變壓器第7 部分:油浸式電力變壓器負載導則
? GB/T1094.10-2003 電力變壓器第10 部分:聲級測定
? GB/T6451-2015 三相油浸式電力變壓器技術參數和要求
? JB/T10217-2013 組合式變壓器
GB1094.1-2013 Power Transformers - Part 1: General
GB1094.2-2013 Power Transformers - Part 2: Temperature Rise of Liquid Immersed Transformers
GB/T1094.3-2017 Power Transformers - Part 3: Insulation Levels, Insulation Tests, and External Insulation Air Clearances
GB/T1094.4-2005 Power Transformers - Part 4: Guidelines for Lightning Impulse and Switching Impulse Testing of Power Transformers and Reactors
GB1094.5-2008 Power Transformers - Part 5: Ability to withstand short circuits
GB/T1094.7-2008 Power Transformers - Part 7: Load Guidelines for Oil Immersed Power Transformers
GB/T1094.10-2003 Power Transformers - Part 10: Determination of Sound Level
GB/T6451-2015 Technical parameters and requirements for three-phase oil-immersed power transformers
JB/T10217-2013 Combined Transformers
掃一掃 手機版
為多個國家和地區的用戶
提供解決方案和服務